Agent element
Contains the agents that should be available when the simulation file is spun up. However, the current Device Simulator does not support defining more than one agent.
Parent
Attributes
| Name | Occurrences | Default Value | Description |
|---|---|---|---|
| Name | 1 | Mandatory | An identifier for the simulation agent. Can be an empty value. For example: MyName. |
| ip | 1 | Mandatory | The IP address to bind the simulation agent to. For example: 127.0.0.1. |
| Port | 1 | Mandatory | Either an integer in the range of [0, 65535], or a range defined by two integers formatted as (fromInt)-(toInt). For example: 161, 161;1161 or 4080-4085. |
| MacAddress | 1 | Mandatory | The MAC address to use for dynamic inserts. Can be an empty value. |
| AutoBuildVersion | 1 | Mandatory | Auto-generated by the simulator. The latest version is 1.3. |
| ToggleResponse | [0, 1] | 0 | No longer used. |
| DatabaseLogging | [0, 1] | empty | No longer used. |
| UseExceptions | [0, 1] | empty | No longer used. |
| GetCommunity | [0, 1] | public | The community string for read access. For example: public. |
| SetCommunity | [0, 1] | private | The community string for write access. For example: private. |
| EngineID | [0, 1] | empty | The agent's engine ID for SNMPv3 communication. Can also be written as engineID. For example: 80.00.22.FF.04.51.41.00.0C. |
| UserName | [0, 1] | empty | The SNMPv3 user name. Can also be written as userName. For example: setUsers. |
| AuthenticationAlgorithm | [0, 1] | empty | The SNMPv3 authentication algorithm. Expected values are HMAC-SHA, HMAC-MD5, or empty. This field is not case-sensitive. This attribute can also be written as authenticationAlgorithm. |
| EncryptionAlgorithm | [0, 1] | empty | The SNMPv3 encryption algorithm. Expected values are AES128, DES, or empty. This field is not case-sensitive. This attribute can also be written as encryptionAlgorithm. |
| AuthenticationPassword | [0, 1] | empty | The authentication password when an authentication algorithm is used. This attribute can also be written as authenticationPassword. For example: password. |
| EncryptionPassword | [0, 1] | empty | The encryption password when an encryption algorithm is used. This attribute can also be written as encryptionPassword. For example: password. |
| ContextName | [0, 1] | empty | Can also be written as contextName. |